Functional Fibres for Mortars

Cement mortars, plasters, levelling compounds, tile adhesives, fillers, fire resistant mortars…

 Logo
 

PB EUROFIBER DRY-MIX

Since the 1980‘s the PB EUROFIBER brand has made a name for itself as a performance additive to improve construction materials. Our functional fibres are used to optimise product and processing properties in a wide variety of technical products including concretes, cement-based mortars, adhesives and dry-mix compounds.

PB EUROFIBER has been successfully used to enhance the fire resistance of concretes and cement mortars, providing upgraded structural safety in these fields since the 1990‘s.

Contact Person

Christina Coban

Phone: +49 (0) 52 42 - 595-176
Fax: +49 (0) 52 42 - 595-276
Mail: christina.coban@baumhueter.de

More Contact Persons
 
Application Sectors
  • Cement mortars
  • Plasters
  • Spackling compounds
  • Knifing fillers
  • Levelling compounds
  • Tile adhesives
  • Fillers
  • Sealing compounds
  • Thermal insulation mortars(facade construction)
  • Refractory compounds
  • Fire-resistant mortars
  • and also for pastes, bituminous compounds, paints and coatings
Fibre Properties
  • Density: 0.91 g /cm³
  • Lighter in weight than PAN /acrylic fibres (1.18 g /cm³) and glass fibres (2.6 g /cm³)
  • Resistant to alkalis
  • Chemically resistant to acids, bases, salts and most solvents
  • Outstanding dispersibility
  • Corrosion-free
  • Antistatic
  • Melting point: approx. 165 °C
  • Auto-ignition temperature: > 320 °C
  • Service temperature range: up to 120 °C
Typical Application Advantages
  • Green strength improved
  • Processing properties optimised
  • Reduction of shrinkage cracking improved
  • Freeze-thaw resistance improved
  • Fire resistance (spalling control) improved
  • Impact strength improved
  • Flexural tensile strength / tensile splitting strength slightly improved
 
 
 

On request we like to send you our product brochure "PB EUROFIBER DRY-MIX" including product range overviews by e-mail. Your contact partner is:

Christina Coban

Phone: +49 (0) 52 42 - 595-176
Fax: +49 (0) 52 42 - 595-276
Mail: christina.coban@baumhueter.de

 

Technical Data

 Multifil / Monofil FibresSplit-Film Fibres
PolymerPolypropylene (PP)Polypropylene (PP)
Fibre cross-sectionroundrectangular / flat
Fibre diameter13 - 145 μm38 x 200 μm
Fibre length2.2, 3, 4.6, 6, 12, 18 mm2, 3, 6, 10, 15, 20 mm
Elongation at breakapprox. 100 - 200 %< 12 %
Tensile strength> 220 N/mm²> 340 N/mm²
Elastic modulusapprox. 1000 N/mm²approx. 4000 - 6000 N/mm²
 
All information and data in this brochure are provided without engagement. We recommend evaluation of product suitability by appropriate testing before use.
 

On Request

  • Other fibre geometries
  • Certifications /official approvals